Tuotetiedot
| Pakkauksen mitat | |
| Leveys | 15 mm |
| Pituus | 140 mm |
| Faktat | |
| Mallisto | Korjaustuotteet |
| Pinnan väri | Neutral |
| Lisävarusteen alatyyppi | Repair |
| Lisävarusteen tyyppi | Hoito ja ylläpito |
| Pintakäsittely | Ultramattalakka |
| Ainesosat | Water based lacquer<br />2-Butoxyethanol<br />3-Butoxypropan-2-ol<br />1,2-benzisothiazol-3(2H)-one |
| How to use | Shake pen for about 15 seconds. The rattling of the mixing balls must be clearly audible. Before using the pen for the first time, rinse out brush tip under running water and dry it with the cotton cloth.<br />Take off cap. Before each use, hold pen with tip pointing upwards in a cloth and squeeze area marked “P/PRESS”. The pen is de-aerated.<br />Hold pen with tip pointing downwards over the cotton cloth and again squeeze area marked “P/PRESS”. Lacquer flows into the brush tip. Slightly dab brush tip on the cloth to avoid a sealing that is too wet.<br />Apply the lacquer evenly in one direction to the repaired area. If possible, do not apply lacquer to the surroundings. If lacquer flow decreases, again squeeze area marked “P/PRESS” and slightly dab brush tip on the cotton cloth. After use, wash out brush tip with water and dab dry on a cloth. Firmly put cap back on to prevent brush tip from drying up.<br />Note: Water-based product - must be protected from frost! |
Tuotenro. 710570
KÄHRS ULTRA MATT -KORJAUSKYNÄ
Korjauskynä ultramattalakattujen lattioiden paikkaamiseen. Helppo tee-se-itse-ratkaisu naarmujen korjaamiseen.
Hoito ja ylläpito
Korjaus
Tuotetiedot
| Pakkauksen mitat | |
| Leveys | 15 mm |
| Pituus | 140 mm |
| Faktat | |
| Mallisto | Korjaustuotteet |
| Pinnan väri | Neutral |
| Lisävarusteen alatyyppi | Repair |
| Lisävarusteen tyyppi | Hoito ja ylläpito |
| Pintakäsittely | Ultramattalakka |
| Ainesosat | Water based lacquer<br />2-Butoxyethanol<br />3-Butoxypropan-2-ol<br />1,2-benzisothiazol-3(2H)-one |
| How to use | Shake pen for about 15 seconds. The rattling of the mixing balls must be clearly audible. Before using the pen for the first time, rinse out brush tip under running water and dry it with the cotton cloth.<br />Take off cap. Before each use, hold pen with tip pointing upwards in a cloth and squeeze area marked “P/PRESS”. The pen is de-aerated.<br />Hold pen with tip pointing downwards over the cotton cloth and again squeeze area marked “P/PRESS”. Lacquer flows into the brush tip. Slightly dab brush tip on the cloth to avoid a sealing that is too wet.<br />Apply the lacquer evenly in one direction to the repaired area. If possible, do not apply lacquer to the surroundings. If lacquer flow decreases, again squeeze area marked “P/PRESS” and slightly dab brush tip on the cotton cloth. After use, wash out brush tip with water and dab dry on a cloth. Firmly put cap back on to prevent brush tip from drying up.<br />Note: Water-based product - must be protected from frost! |