Vous consultez la page destinée aux consommateurs
- pour voir cette page destinée aux revendeurs Kährs, Cliquez ici
Réf.art 710803
KÄHRS HUILÉ 0,5L
Protégez et sublimez la beauté naturelle de vos parquets en bois avec l'huile satinée Kährs – une huile d'entretien uréthane durcissante de haute qualité, conçue pour nourrir et raviver les surfaces huilées. Sa formule premium pénètre en profondeur dans le bois, restaurant des teintes riches tout en créant une finition durable et protectrice au satiné élégant. Idéale pour l'entretien courant comme pour la rénovation, elle contribue à atténuer les traces d'usure et les égratignures légères, tout en améliorant la résistance à la saleté et à l'humidité. Le résultat est un toucher doux et naturel qui met en valeur le caractère unique et le grain du bois. Adaptée aux professionnels comme aux utilisateurs bricoleurs expérimentés, c'est une solution raffinée pour conserver vos sols frais, protégés et magnifiquement entretenus.
20,10 €
Les prix sont indiqués TTC
Trouver un revendeur
Visitez l’un de nos revendeurs pour voir nos sols en situation réelle
Fiche produit
| Packaging dimensions | |
| Largeur | 85 mm |
| Longueur | 85 mm |
| Faits | |
| Collection | Nettoyage et entretien |
| Accessory Sub-type | Maintenance |
| Accessory type | Entretien |
| Traitement de surface | Huile |
| Ingrédients | Urethane modified alkyd resin Solvent: N-Paraffins Solids by weight: Approx. 22% |
| How to use | Vacuum clean the floor carefully. Clean the floor using Kährs Cleaner and Micro Mop. Follow the Kährs Cleaner instructions. Only damp cleaning, the surface should be dry again within a minute. For very dirty floors replace the micro mop using a rough brush. Remove cleaner and dirt using a wrung out cloth. Dry the surface using a dry cloth and leave the floor to dry for 30 minutes. For very dirty floors or on floors with heavy textures, it might be necessary to repeat step 2-4. Protect the floor from direct sunlight and keep off all underfloor heating from day before application till 24 hours after application. The temperature of the floor, oil and air must be between 13°C (55°F) and 25°C (77°F). Relative humidity of the room should be between 40% and 60%. Higher humidity of room extends drying time of finish thus waiting time between layers Apply a thin layer of Kährs Satin Oil on the surface and spread it evenly with a Kährs Micro Mop or a dry cloth by scrubbing along the texture. Shake the can vigorously. Polish again with a new Micro Mop after 10-15 minutes so that no sticky parts are left. Please observe that two layers of thin oil gives a better result than one thick layer. Applying a too high amount of oil will result in a sticky surface. Note! A danger of self-ignition exists in contact with organic materials (e.g. cotton cloths, saw dust, absorbing insulation materials etc.) due to self-drying oil content. Rags and other organic materials soaked in oil have to be put into water immediately after use, in order to avoid self-ignition. |