Art.nr 710803
KÄHRS SATIN OLIE 0,5 L
Kährs Satin Oil er en hærdende urethanolie til vedligeholdelse af fabriksbehandlede, olierede træ- og parketgulve. Produktet holder dit gulv smukt ved at give træet et beskyttende olielag med en flot glans. Dækkeevne: 100-150 m2. Information til Kährs-forhandlere: Sælges i kolli á 6 stk. i en displaykarton.
Find forhandler
Besøg en af vores forhandlere for at opleve vores gulve i virkeligheden
Produktfakta
| Emballagedimensioner | |
| Bredde | 85 mm |
| Længde | 85 mm |
| Fakta | |
| Collection | Rengøring og vedligehold |
| Tilbehørsundertype | Maintenance |
| Tilbehørstype | Plejeprodukter |
| Overfladebehandling | Olie |
| Ingredienser | Urethane modified alkyd resin<br />Solvent: N-Paraffins<br />Solids by weight: Approx. 22% |
| How to use | Vacuum clean the floor carefully.<br />Clean the floor using Kährs Cleaner and Micro Mop. Follow the Kährs Cleaner instructions. Only damp cleaning, the surface should be dry again within a minute.<br />For very dirty floors replace the micro mop using a rough brush.<br />Remove cleaner and dirt using a wrung out cloth.<br />Dry the surface using a dry cloth and leave the floor to dry for 30 minutes. For very dirty floors or on floors with heavy textures, it might be necessary to repeat step 2-4.<br />Protect the floor from direct sunlight and keep off all underfloor heating from day before application till 24 hours after application.<br />The temperature of the floor, oil and air must be between 13°C (55°F) and 25°C (77°F).<br />Relative humidity of the room should be between 40% and 60%. Higher humidity of room extends drying time of finish thus waiting time between layers<br />Apply a thin layer of Kährs Satin Oil on the surface and spread it evenly with a Kährs Micro Mop or a dry cloth by scrubbing along the texture.<br />Shake the can vigorously. Polish again with a new Micro Mop after 10-15 minutes so that no sticky parts are left.<br />Please observe that two layers of thin oil gives a better result than one thick layer. Applying a too high amount of oil will result in a sticky surface.<br />Note! A danger of self-ignition exists in contact with organic materials (e.g. cotton cloths, saw dust, absorbing insulation materials etc.) due to self-drying<br />oil content. Rags and other organic materials soaked in oil have to be put into water immediately after use, in order to avoid self-ignition. |